How To Update Green Mountain Grill

As a company, Light-green Mount Grills has a solid reputation for quality and customer service. However, even the most reliable pellet grills can meet problem sometimes.

Knowing how to identify and correct these issues in advance tin relieve a lot of hassle. Have a await at this Greenish Mountain Grill troubleshooting guide to familiarize yourself with the basics.

Here's a listing of the issues that you might meet when using a Green Mount Grill, and the steps that you can take to resolve them.

Error Codes

These are the different mistake codes that you might encounter in the digital brandish window.

SEN

This message indicates a trouble with the thermal sensor. It tin be caused by a number of things: grease buildup, improperly positioned components, loose materials. For ideas on how to remedy them, see Thermal Sensor Bug, below.

When you've checked for whatever possible obstructions and eliminated this as the cause, remove the front control panel and check the wiring. If whatever of the wires are bent or damaged, the control panel will need to be replaced.

NOFD

The "NOFD" readout ways that the meat probe isn't working correctly. Check the wire for kinks and make sure it's connected securely.

OUL

This readout is designed to alert you to problems with the electric components of the pellet grill. Ever disconnect the unit from the power source before attempting to correct any electrical bug.

FAL

"FAL" means that the igniter component has failed. See Grill Won't Ignite, below.

E01, E02, E04

All of these messages indicate a power overload, which tin occur when the grill is hooked up to an unstable ability supply. It can too happen if the excursion is shared by a unit that turns on and off intermittently.

Why are at that place different error messages for the aforementioned effect? The readout depends on whether the problem originated with the igniter, fan motor, or auger motor.

E08

Yous'll only come across this message if you're using the Davy Crockett model, which is Green Mountain'southward entry into the portable grilling race. It means that the unit is suffering from depression voltage, due to a power supply lower than 12v. It can be resolved by hooking the grill upward to an adequate ability source.

Temperature Problems

When information technology comes to pellet grills, this is one of the most common complaints. If the grill has ignited simply isn't reaching the prepare temperature, accept a look at the combustion fan. If any of the blades are damaged, you'll demand to contact Green Mountain Grills for a replacement part.

The problem could as well be due to a misplaced heat shield. The "Five" on the bottom of the shield should be centered over the firebox in lodge to ensure even heating. When using the aligning rod, make sure the shield is positioned at the "0" spot on the rod. For more communication on this upshot, run across Uneven Heating, below.

Auger Issues

Before using the pellet grill for the first time, y'all should charge the firebox by feeding a small amount of pellets into the auger tube. One time you've done so, turn the grill on and set it to bike "0."

Through the firebox, yous should be able to see the auger turning. If information technology isn't turning, the pellets may be jammed upwardly effectually the auger'south intake. Turn the unit off and move the pellets around in the firebox, then return the grill to bike "0." You may have to repeat this pace a second time before the pellets can feed completely through the auger tube.

Once the pellets have fed through the auger, turn the unit of measurement off again, then run it through all the cycles from 0 through three. Listen advisedly to the motor. If you lot tin can hear it and the auger even so isn't turning, contact client support.

Clicking Audio

Sometimes yous'll hear a clicking sound from the pellet grill while the auger is turning. This happens when the wires beneath the hopper unit of measurement shift out of place and block the auger's motor fan. Bank check the area and remove the obstruction to put an end to the clicking racket.

On the other paw, if the clicking sound persists fifty-fifty when the auger isn't turned on, it could mean that i or more than of the gears is stripped. In this case, the motor volition need to be replaced as soon equally possible.

Combustion Fan Issues

A faulty combustion fan can result in all sorts of trouble. Yet, be aware that the fan may non always blow at a consequent speed. Every bit long as it'due south helping the grill to maintain a stable temperature, it doesn't matter if it blows continuously or not.

If you practise suspect that the combustion fan isn't doing its chore, your kickoff step is to unplug the grill. And so try to turn the fan manually with your fingers. If the blades turn effortlessly and there's no sign of damage, the fan should be fine. Otherwise, it will need to be replaced.

If the fan is undamaged and the problem persists, bank check to make sure the wiring is secure. Frayed wires should be replaced as presently as you notice them.

Thermal Sensor Issues

Whenever you fire up the pellet grill, check the temperature display. The readout should give you a number that's fairly close to the ambient temperature, since the grill hasn't had a adventure to get hot yet. This is how you know the sensor is in fine working society.

Sometimes, the grill volition display wild temperature fluctuations even when information technology'due south been working fine upwardly to that betoken. For example, if the readout goes rapidly from 200 to 450 degrees (or vice versa), it's probably inaccurate. Likewise, if the display reads "SEN" instead of showing the temperature, you're experiencing problems with the thermal sensor.

If you've wrapped your grease tray in aluminum foil for easy cleanup, check to make sure the foil isn't blocking the sensor. The grease tray could also be improperly installed. Take a look at the education manual to ensure that it'south positioned correctly.

The problem might besides be due to an improperly installed heat shield. See Uneven Heating, beneath, for communication on how to correct this issue.

If none of these steps resolve the trouble, contact customer support at once.

Uneven Heating

If the grill isn't heating evenly, a misplaced heat shield could be to blame.

To resolve this issue, carefully slide the shield to the warmer side of the grill, taking care to move it just 1/4-inch at a time. In one case the temperature begins to increase on the cooler side, the oestrus shield should be in the right spot.

Tip: When y'all've found the proper placement, take measurements so you'll exist able to put the shield back in the correct position every time yous motility the grill.

Grill Won't Turn On

If you've pushed the power button and the grill yet won't turn on, the first step is to make certain the power cord is plugged into a working outlet. One time you've done that, check to see if the adapter low-cal has turned on.

Still having trouble? Inspect both ends of the power string to ensure that you lot're getting a potent connection. The next step is to unplug the grill and cheque the circuit breaker and ground fault excursion interrupter (GFCI). If some other appliance works when you plug it into the same outlet, the event isn't with the ability source.

The last step you lot tin accept is to remove the control panel from the grill and bank check for whatever loose wires. Brand sure the grill is unplugged before you attempt this. If the grill still won't turn on, it'due south time to contact Green Mountain'due south customer service department.

Grill Isn't Heating Up

When this occurs, check the firebox. In near cases, when the grill doesn't reach the desired temperature, information technology's because the firebox is overloaded with pellets. If that'south the problem, plough off the grill until yous've had a chance to make clean out the firebox, then start over.

Tip: You'll need to prime the firebox earlier the first employ, and likewise if you've immune information technology to run until the auger component is completely empty.

Grill Won't Ignite

You may exist alerted to this result by the "FAL" message. When the grill isn't lighting, information technology could exist because there's too much ash buildup in the firebox. Make sure to wait until the unit has had a take chances to cool down before attempting to make clean it out.

Similarly, the firebox may exist too total of wood pellets to ignite properly. Considering the igniter won't piece of work unless the air tin can flow freely through the compartment, this is a common problem. The same consequence can occur if the auger isn't feeding the pellets into the compartment at all (encounter Auger Bug, higher up).

As a concluding resort, cheque the combustion fan. If none of these fixes does the play a trick on, the igniter is likely defective and in need of replacement.

Tip: You can low-cal the grill manually while y'all wait for the replacement function to arrive. Merely add a scattering of pellets to the burn pot and low-cal them with a propane torch.

Smoke Coming Out Of Hopper

This can be an alarming sight, especially if you have guests you're trying to impress. The primal to avoiding information technology is to keep the burn down pot as make clean as possible. Articulate out all ashes and pellets on a regular basis.

It's also of import for the hopper lid to fit snugly. Press down on every corner of the lid until information technology'south sealed every bit tightly every bit possible. If the lid is warped, you can perform a quick prepare by using two sheets of tin foil to create a seal between the chapeau and the hopper.

The pellet dump door should fit tightly every bit well, and the square gasket between the hopper and auger needs to exist well-sealed. Alternatively, y'all tin can inspect the combustion fan for damage and replace the part if necessary.

Beeping Low Pellet Alarm

A constantly beeping alarm could be a sign that the pellet level has fallen beneath the sensor. Refilling the pellets normally does the trick. If not, yous can endeavor unplugging the grill, so disconnecting and reconnecting the alarm. When these steps don't work, information technology means the warning is broken.

Tip: The low pellet alert is just a secondary feature. If it's beeping all the time, you lot can disable it and continue cooking as usual.

Temperature Command

When information technology's working correctly, a unit of measurement from Green Mountain Grills offers a temperature range of 150 to 500 degrees Fahrenheit.

If there'southward a power suspension, you can apply the "hot start" push button on the mobile app (see below) to restart the unit, and so it won't lose likewise much estrus. There's also a oestrus shield manner that will alert you when the hopper is running low on fuel.

Issues With Wi-Fi

Greenish Mount Grills offers a mobile awarding that allows yous to control the temperature of the grill from a distance. This is an ingenious and useful feature—as long equally it's working correctly.

When the Wi-Fi characteristic is malfunctioning, it'southward fourth dimension to reset the system for an update. Hither's how to do it.

Attempt to reset the router. You may demand to repeat this footstep several times, just in instance.

Next, make sure that the Green Mountain Grills network betoken is coming through. The stronger the signal is, the better results you'll have.

Cheque the grill antenna and ensure that you're using the ii.4 GHz band on the router.

Set the countersign, taking care not to use the "!" symbol. In fact, it's a good thought non to use whatever special characters at first, since older versions of the Wi-Fi feature didn't take them. The password should also be less than 40 characters.

If the update works properly, the grill volition exist continued to your abode's Wi-Fi network.

When these steps don't piece of work, it ways that the organization is unable to locate your grill. That's when you lot demand to contact someone in the customer service department.

How To Reset

If you need to reset the grill for whatever other reason, here are a few more than tips:

Disconnect the unit from the ability source and then plug it in again. Press the "FOOD" push button and turn on the grill. Wait 15 seconds before releasing the button.

Wait until the LCD readout reaches 999, so unplug the grill again. Plug it back in and wait for 30 seconds. Yous should be able to use the grill again with no bug.

Warranty

If all else fails, contact the manufacturer straight. As long as the grill is still under warranty, they're responsible for replacing any damaged parts. Be sure to human action before the warranty expires, or the company will no longer be obligated to help out.

Final Thoughts

If you encounter any more bug in the hereafter, now you have enough Green Mountain Grill troubleshooting experience to address them. Fortunately, the company has a friendly and knowledgeable customer support department that volition be happy to assist you if yous continue to have problem.

All-time of luck, and happy grilling!

Source: https://bbqhost.com/green-mountain-grill-troubleshooting/

Posted by: greenehincture.blogspot.com